How Do You Preserve An Inverter Battery When Not In Use? (Proven Tips)

How do you preserve an inverter battery when not in use: This might have often happened to you that you can’t access your useful devices due to faults in the regular power supply system. So, you couldn’t complete many of your important tasks.

The same thing may happen to you in a dry camp or during a  journey to a remote place.  In such circumstances,  only power inverters can help you with its extraordinary properties.

Power inverters are electronic devices that help to run electrical equipment even in the absence of electricity. Anyways, to enjoy their charisma, you must connect them with inverter batteries which work as the foundation of that backup system.

Due to such significance, their maintenance always remains crucial when not in use.

That’s why we have come up with a brief instruction on how do you preserve an inverter battery when not in use. Let’s take a look at them for better understanding.

How Do You Preserve An Inverter Battery When Not In Use?

According to the configuration of inverter batteries, you can categorize inverter batteries into two types, namely sealed and unsealed batteries. Since both of them have a slight difference in their configuration, their preservation process is also unalike.

So, you have to first check the configuration of your inverter battery. Then, you will follow one of the following procedures to store your unused inverter battery. 

Now, take a look at the following part carefully. 

how do you preserve an inverter battery when not in use
how do you preserve an inverter battery when not in use

Steps to Preserve Unsealed Inverter Batteries When Not in Use 

The preservation process of an unsealed battery is somehow prolonged. But once you are done with this, your adorable hardware can stay more protected than the sealed one. Here you go… 

  • Get the battery charged fully. 
  • To avoid the risk of chemical reaction, remove all the electrolytes from it before storage. It’s better to go to any battery serviceman to get the job done flawlessly. 
  • Then, apply the coating of petroleum jelly on the clean terminals to protect them from corrosion.
  • After that, keep it to any dry, cooler, dust, and noise-free place. 

Then, whenever you need to reuse it, just fill it with electrolyte and reconnect it to the inverter. 

Way to Preserve Sealed Inverter Batteries When not being Used 

For a sealed inverter battery,  the preservation process is much easier.

  • First, charge the battery fully. 
  • Cover the terminals with petroleum jelly coating before keeping it to any cool and dust-free place like unsealed batteries. 

Since you couldn’t drain electrolyte out of it, you have to take some after-storage efforts to maintain its workability. Such as: 

  • Take a regular inspection of the place where you kept it.
  • Move it to a new cooler place if necessary. 
  • Charge it every 3 months later during the preservation period. 
  • Look into the electrolyte level of the battery regularly. 

How do you protect my inverter battery? 

You just went through some guidelines on preserve the inverter battery. However, proper maintenance is similarly important during the active period as well.

By taking proper care of your inverter battery, you can extend the performance and service life to it as well as your inverter. Besides, you can also ensure the safety of your entire house. 

Here is a complete guide on how do you protect your inverter battery. Just go along it and apply directions to maintain the capacity of your inverter battery. 

(1) Charge Your Battery 100% 

Disconnecting the battery from the inverter is a must to start the maintenance checkup.

So, you have to get the battery charged for 10 to 15 hours, in other words, until it gets 100% powered before removing it from the inverter.

In addition to this, you must let the inverter detached from the wall socket as well. 

(2) Look into the Acid Level 

The acid level of your battery is one of the significant determinants of your battery’s performance.

So, you should make regular tests of your battery’s acid level to ensure each of your battery cells has an equal amount of acid. You will find the acid level at the float indicators.

If you observe an imbalance of acid level, open the battery and fill it with DM water up to the prescribed limit. 

(3) Check the Color of Acid

Along with the acid level you need to check the acid color as well. Because you can detect if your battery is contaminated or at its last stage of service life by looking into the color of acid.

If you find the acid getting black or brown, take immediate steps to replace it. 

(4) Keep the Terminal Area Cleaned 

Sometimes, you may notice, your battery terminals are featuring lead sulfate. It actually comes from the inverter and impedes the flow of current towards the converter.

That’s why you should try to clean the terminals area of the battery routinely. Use some warm water and a nylon brush to perform this task properly. 

(5) Clean the Outer Layer of the Battery

Frequent dusting is not a new thing for a battery or other hardware contents. But dust can negatively affect the performance of the batteries.

So, you must always keep your battery surface dust-free. Use a dry, cotton cloth for this cleaning purpose.

(6) Repair the Damaged Wires 

Damaged wires are greatly responsible for creating short circuits and other electrical accidents.

So, whenever you pursue routine maintenance, you should take a look into the battery wires to find out any crimp, break, and insulation melt.

As soon as you get any, take sufficient attempts to repair them. 

Final Thoughts 

Now, you have an absolute idea about inverter battery preserves. Besides, you have learned how you can perform regular maintenance of your inverter battery.

So, it will be very easy for you to uphold the performability and longevity of it by following our all-rounder guidance. 

However, this is not the end of your learning. Research to find more and more ways to keep up the healthiness of your inverter battery.

Writer: Nayeema Akter

Leave a Comment

nineteen + 16 =