Do Inverters Need Ventilation: At present, inverters have become an integral part of our everyday life. We are using them in our houses, offices, shops, and other establishments.
They allow us access to our useful electrical equipment while there is a power-cut. So, we can perform our day-to-day activities in even better ways.
Anyways, many of us might have a lot of queries about the various aspects of inverters. In today’s article, we are going to address some of them.
So, be mindful and look into the following part for better understanding.
Do Inverters Need Ventilation?
This is one of the most asked questions about inverters. Anyways, ventilation is a must for inverters. Because they create a great deal of heat during the power generation and it’s pretty harmful to their performance.
So, install your inverter in an airy place. And make sure the ventilation system is well enough. Such as:
- The cooling fans are working.
- Intake vents have no blockage.
Can I Keep My Inverter in the Bedroom?
Yes, you can keep your inverter in the bedroom without having any health concerns. Because the acidic fumes emitted from the inverters are within safe limits.
But make sure your bedroom has sufficient ventilation. Otherwise, you have to install it in another well-ventilated part of your home.
Can An Inverter Catch Fire?
There is no definitive answer to this question. Because, in the market, you will find some inverters which are pretty good at providing long-term reliable services.
Again, there are some inverters that can set your houses, offices, and other establishments on fire accidents.
However, to avoid the risk of fire accidents, you should first know about their sources. Here we have listed some reasons for fire in inverters. Let’s look into them for a better perception.
(1) Poor Fume Filters
Fume filters are an integral part of inverter batteries. But they can, sometimes, lead to severe fire accidents if they get cracked someway. So, make sure your inverter battery is tough enough not to break so easily.
(2) Fluctuations of Input Voltage
There are a lot of reasons for Mosfet transistors to burn out.
Fluctuations of Input voltage are one of them. When your inverter receives an inconsistent unit of voltage, most of its internal components fail to work properly in the long run.
Consequently, you face a terrible blast in the MOSFET transistors.
(3) Low-Quality Base
In low-quality inverters, Printed Circuit Boards (PCB) often feature low-quality bases. As a result, inverters catch frequent short circuits that can lead to tremendous fire accidents.
Apart from this, undersized tracks of your inverter can also initiate such incidents.
(4) High Temperature
You already know that inverters generate heat during their function. So, keeping them at a cooler place is pretty important. If the temperature goes beyond the safety limit, your inverter can burn out anytime.
(5) Auto Cut-off Function
Some inverters have no cut-off function. For this reason, they can’t release extra load when they get messed up. This increases the probability of internal burnout.
How Can I Take Care of My Inverter Battery?
There is no other way to extend the service life of inverter batteries but regular maintenance. So, you should know the ways to take at-home care of your inverter battery.
Anyways, we have some easiest ways to sustain the capability of your inverter battery. Go over them along with our succeeding discussion.
(1) Select a Perfect Place for Installation
Three is no need to talk about the importance of ventilation for an inverter battery. Because you already know how it affects the performance in positive ways.
Now, it’s time to select a breezy place for your inverter battery. It will not only help to boost up the performance of your inverter battery but also reduce the labor of frequent water topping.
(2) Discharge it Regularly
If you just put your inverter battery without using it, its efficiency will vanish after a certain period. So, you have to keep using that on a regular basis. But if it doesn’t happen, you must discharge it every month. Then, get it powered again.
(3) Maintain the Water Level of the Battery
There is a limit of least and highest water for inverters. It’s too necessary to maintain the water of the battery between these two.
To ensure that, look into the water level of the battery every two months and fill it up with distilled water if needed. Make sure the water doesn’t contain excessive minerals and impurities.
(4) Keep it Clean
Dust, dirt, or other impurities can degrade the performance of the inverter battery. So, don’t leave any space for dust and dirt to rest on its surface. Use soft cotton napkins to clean it.
(5) Remove Corrosion from Battery Terminals
Battery terminals get corroded very often. If you find your battery in such a condition, take the necessary steps to fix it.
First, take some boiling water and baking solution and pour them into the corrosive area. Then, take a toothbrush and rub it on that part until the terminals get corrosion-free.
Then, take some petroleum jelly or vaseline and apply it on that part to prevent future corrosion.
(6) Remove the Barriers of Vents
Return vents of the battery helps to emit hydrogen gas. When they get blocked by dust, this hydrogen gas can’t come out of the battery.
As a result, the chance of fire accidents increases. So, make sure the vents are dust-free and unblocked. Also, keep away clothes and other things from the vents to get uninterrupted ventilation.
You went through some important queries related to power inverters. You also learned how to take care of inverter batteries to enhance their effectiveness along with some possible reasons for inverter burst.
All these learnings are going to help you use your inverter and battery in a more decent way. And you will be able to get better long-term services.
Anyways, do more research on inverters to enjoy a risk-free, sound journey with them.
Writer: Nayeema Akter